树莓派安装python quick2wire库
准备工作：
sudo apt-get install git
sudo apt-get install python3
sudo apt-get install python-pip
sudo apt-get install python-virtualenv编译安装quick2wire-gpio-admin：
git clone https://github.com/quick2wire/quick2wire-gpio-admin.git
cd quick2wire-gpio-admin
make
sudo make install将当前用户pi添加至gpio组：
sudo adduser pi gpio此时终端中若存在命令gpio-admin则说明quick2wire库安装成功
接下来安装quick2wire的python接口，首先git clone：
git clone https://github.com/quick2wire/quick2wire-python-api.git进入quick2wire-python-api，使用setup.py安装quick2wire python api：
cd quick2wire-python-api
sudo python3 setup.py install至此quick2wire的python环境安装完毕。
参考：https://www.cnblogs.com/hangxin1940/archive/2013/04/04/2999015.html